gkos_

I need help I baught a remotestart system and I would really apreciate it if anyone can show me a wire diagram

SR2K

http://www.bulldogsecurity.com/bdnew...ngdiagrams.asp

tansupercrew

You're going to have to use a test light and volt meter. You would need a lot of diagrams as the remote start crosses several systems...

gkos_

Do I need any bypass modules?

tansupercrew

What is the brand of start kit you got? There should be pretty detailed instructions inside. Hopefully it came with t-tap connectors, just make sure to properly crimp them.
You shouldn't need anything other than what is in the kit. You will have to tap into the brake switch, ign switch, if you have power door locks you will need to tap into those, parking lights, grounds, batt power and switched power. The instructions should tell you exactly which wore you need to use ie., brake switch (-) which would be the wire that is grounded when you press the brake pedal.
If you take your time and use your head, you shouldn't need go run anything much further than the fuse box. Maybe one wire directly to the battery..
Good luck!

gkos_

Where's the ignition key cylinder imput?

gkos_

And nutrual/park ground at