Antenna help
10-22-2010, 06:47 PM
#1
Member
Thread Starter
Join Date: Oct 2010
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Antenna help
My radio antenna broke off in the pod that on the fender of my truck. So only half the threads are left on the antenna itself and the other half are stuck inside the pod where the antenna screws into.
So i need some advice how to get the piece that broke off into the pod out so i put a new antenna in
So i need some advice how to get the piece that broke off into the pod out so i put a new antenna in
10-22-2010, 07:23 PM
#2
You will most likely have too replace the antenna base on the fender. Just pop the piece of plastic off and there are 3 screws holding the base on. Take the screws out and the base unplugs from the coax. Go to a junkyard and get a new base and antenna of a similar truck. That is what I did only cost me 4 bucks and have new antenna.
10-23-2010, 12:36 AM
#3
the candy man
Join Date: Apr 2010
Location: jville florida
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
mine did the same thing but ive been rockin it that way for like 3 weeks now...i mean some stations are iffy but usually i get good reception still but now i know what to do....i just never looked into taken it off and swappin it
