Originally Posted by Dholla

So as i was solving the issue of my disappearing courtesy lights into the door, I finished replacing the passenger side one with the LED and when i went to te drivers side i had two problems. First, I could not remove the door panel to retrieve the light from inside my door because of my spotlight. Secondly, No matter what i did, i could not rip out the plastic housing to try and get the light that way. Should I just cut the out of the plastic housing or what should i do?

Originally Posted by 03f15012

The reason why you cant get the housing out is because it is screwed in... not clipped. Can you get the spotlight out?

Originally Posted by Dugger02Supercrew

I used the 194 or "T10" (another name for it) in my door lights, high mount brake lights, and my license plate... They all work just fine. And shine where theyre supposed to. Only spent $10 on 10 of them on ebay from a store here in Houston.

Originally Posted by P-Kidd

So I've done most of the smaller led swaps but now I'm looking at the taillights. How much brighter will the LEDs be vs stock?

Originally Posted by Tys 4x4

Not sure if It was posted in here or not, but does anybody know how many of each bulb you need? Meaning which ones are a festoon bulb and how many and how many are not?

If I can avoid going out to the garage and pulling off the lenses to look I'd like that :P

Originally Posted by Fordman46

God am i ever confused.. could anyone post exact links to superbrightleds products for every light? It seems so simple to me but as soon as I start looking at 194, 3157, etc... I have no idea which one to decide since there are so many. Not sure if anyone would be willing to take the time to do this but I think with the number of subs, it would be appreciated. Really wanna do this!