01f1502wd

sweet. ordered. any idea where would be a good place to hook it into? I would want it to come on when I turn on the headlights/dashlights. Also would regular speaker wire work for the space inbetween where I dont want lights? Id like to run a single wire with pos and neg wires and not 2 seperate ones.

2000MTZ

iTrader: (1)

The wire for that, same as aftermarket gauges is the blue w/ red tracer wire behind the headlight switch, you can dim them like the factory cluster

01f1502wd

^thank you sir. just got in my lights so I will be wiring it up tomrrow/friday or next week.

BrowningSCrew

Nice

RicheysFX4

What bulb number is the 4x4 switch

2000MTZ

iTrader: (1)

I know it's the same as the headlight switch on 97-98's. which I believe is a 5mm

RicheysFX4

I found the bulb number it's a f65z13466aa

But ford says its a discontinued bulb and can only be bought with a new switch wtf

2000MTZ

iTrader: (1)

It is a special setup, there's writeups for switching a 97-98 headlight switch to LED, it's the exact same procedure for the 4x4 switch. Takes a LED and resistor.

Dholla

So i ordered some LED's for my interior today thinking that since my driver's side courtesy light was burnt out, might as well replace them all. The passenger side light works but when i took off the drivers side lens to my surprise, there was nothing there, Hahaha. Does this mean the harness and light is behind the door panel? And my second question is how hard is it to remove the door panel on an XLT?

2000MTZ

iTrader: (1)

^ it's real simple, takes maybe a minute.

Pop off B-pillar and remove screw
Pop off door handle surround and remove screw
Pop off door switch panel and unplug switches
Lift up on the panel and it comes right off