3.73 gears
07-25-2009, 11:10 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2009
Location: arkansas
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
3.73 gears
im looking to put either 3,73 or 4.10 gears in my truck, which would yall suggest? i have 32 in tires...would the gears out of a f250 or anything fit my rearend? maybe an excursion...its going in my 02 4x4 5.4 screw
07-26-2009, 10:33 AM
#2
Junior Member
Join Date: Oct 2008
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
well from what I understand the F250 and up have diffrent size rear ends then the F150 and even the F150 7700 series has a diffrent size rearend then a 150. Im assuming that you have a 3:55 or even a 3:31 ratio in the truck now, which would mean that you would have a 8.8" rearend so you can't just get the gears out of a bigger truck you need to get gears for the 8.8 and if you plan on using 4x4 you need to do the gears in the front axel which is also a 8.8" and those gears are reverse cut.
07-26-2009, 02:09 PM
#4
Junior Member
Join Date: Oct 2008
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
well in that case you should be able to get 3:73's from a f150 for the front and back, but if it was me i would check out how musch it is to get ones from a used/scraped truck compared to getting a new set. but if it was me and I was spending the money on gears I would go with 4:10's and to get those you need to buy new ones
