Originally Posted by J.rose92

What size/kind of leveling kit are you guys running or would you think I need to fit 315/70/17 on my truck. I'm currently on 305/70/17 with the stock keys cranked up and all I got was 23 inches from center of hub to bottom of fender.

Originally Posted by jprevat

Pick up some aftermarket keys or new tortion bars. Keep your front end at or below 25.25" and you will be golden. All of the aftermarket keys or pretty much the same. I would still buy name brand though. BTW: your tires should have been around 33.8" brand new.

Originally Posted by J.rose92

So if I get some name brand 3in keys and just put it up to 25.25 I should be fine to fit the 315 which are ab a 34.5

Originally Posted by jprevat

You will fit them with no trouble. May have slight rub on valence or fender well plastic depending on wheel width and offset.

Originally Posted by J.rose92

I believe my rims are 17x8 or 9 and the offset is 12mm

Originally Posted by BlackThundah

I think he meant 24.25". Don't go past that.

Originally Posted by Bullhorn

It looks like I have the 3.31 gears in mine (sad sigh) running 31's, 265/75/R16 (on it when i bought it) It does just fine for me there for now, and after reading this tread I know that though I wanted 33's, a 3.73 would be best. but I plan on running 35's after this thing goes over 200k and I can turn it into a toy, that means that the 4.10 gears are my best choice it seems. Aaaaaaand since the money for a regear is not in the budget I will run what I have and Ill regear it when I decide to go 35" and lift it.