2001 Super Crew Trans/Transfer Case Problems
09-17-2014, 04:36 PM
#12
Senior Member
iTrader: (1)
The following users liked this post:
kenn_chan (09-23-2014)
09-22-2014, 09:17 PM
#13
Just a update of what the conclusion was, just in case if someone else might come across this issue
I replaced the transfer case, took about 5 hours. Found a bad u-joint, replaced that also.
Now it runs great, put about 300 miles on it, and no issues.
When I removed the old one I could hear something really loose in there, just flopping around. Checked the fluid and it was full of metal.
I replaced the transfer case, took about 5 hours. Found a bad u-joint, replaced that also.
Now it runs great, put about 300 miles on it, and no issues.
When I removed the old one I could hear something really loose in there, just flopping around. Checked the fluid and it was full of metal.
The following users liked this post:
kenn_chan (09-23-2014)
09-22-2014, 10:03 PM
#14
Senior Member
iTrader: (1)
Just a update of what the conclusion was, just in case if someone else might come across this issue
I replaced the transfer case, took about 5 hours. Found a bad u-joint, replaced that also.
Now it runs great, put about 300 miles on it, and no issues.
When I removed the old one I could hear something really loose in there, just flopping around. Checked the fluid and it was full of metal.
I replaced the transfer case, took about 5 hours. Found a bad u-joint, replaced that also.
Now it runs great, put about 300 miles on it, and no issues.
When I removed the old one I could hear something really loose in there, just flopping around. Checked the fluid and it was full of metal.
09-23-2014, 07:56 PM
#15
farts dust
Just a update of what the conclusion was, just in case if someone else might come across this issue
I replaced the transfer case, took about 5 hours. Found a bad u-joint, replaced that also.
Now it runs great, put about 300 miles on it, and no issues.
When I removed the old one I could hear something really loose in there, just flopping around. Checked the fluid and it was full of metal.
I replaced the transfer case, took about 5 hours. Found a bad u-joint, replaced that also.
Now it runs great, put about 300 miles on it, and no issues.
When I removed the old one I could hear something really loose in there, just flopping around. Checked the fluid and it was full of metal.
thanks for the update, now when "we" search we will find more than just a question.