South Central: WTB - OEM FX4 Fender Flares
#1
Senior Member
Thread Starter
WTB - OEM FX4 Fender Flares
I have a customer that wants to installed a set on his 14 XLT, we are located in the New Orleans area.
Please let me know if you have anything.
Wayne
Please let me know if you have anything.
Wayne
#2
Professional Detailer
send him to biloxi to buy mine!!! Theyre still on my truck currently but still look new as they should. They are non painted and Ive toyed with the idea of removing them but never have because I dont want to store them!
#4
Senior Member
what do you need the clips for? i just installed a set of FX4 flares on my XLT and could not use them, was not going drill the fenders on the outside. just used washer head screws for the 4 holes needed for lip and reused the botom bolts and pushins. got the perfect screws from NAPA and only had to drill a small holes. also bought the Bushwacker fender flare molding. i have the clips from the factory flares.
#7
Member
If any of these fall through.
http://www.ebay.com/itm/331177927817?redirect=mobile
http://www.ebay.com/itm/331177927817?redirect=mobile
Trending Topics
#9
Senior Member
installing flares
i used 16 washer head screws Balkamp part #665-3265 pkg of 15 need 16 so you have to buy 2 bags from NAPA. the screws are black and cover the holes in the factory flares. front flares, reuse pushpin underneath and screws for the 4 holes. rear flares, use the bolts underneath, 2 each sides and drill 4 holes for each flare. i purchased Bushwacker fender flare trim from Summitt racing part#000042-01 for $27 plus shipping. i used this to cut down on the flares rubbing on paint, FX truck have holes in outside of the fenders, so you don't use those attachments. do not have any closeups but on YouTube you can see an install. some people on here use the pushpins on the 4 holes but i didn't want to drill that big diameter hole.
#10
Senior Member
Thread Starter
The owner of the truck i was asking for just called me and said he just ordered a set of EGR OEM Style Flares. Thanks for the fast replys, and sorry if anybody went out of there way for me.
Wayne
Wayne