88RedLX

As title states...looking for Kicker amp DL3J-18T806-AA & Ford jumper harness that came from the Kicker kit (DL3Z-18808-A) for the 2013-2014 trucks with the 4.2" or 8" touchscreen.


Feel free to post in this thread or PM me...whichever you prefer.


Thanks in advance.

MrSub

I have the complete system for sale if you are interested. It was from a Supercab though. I think most parts are the same except for the sub. I might part out if I can sell it all.

88RedLX

If you decide to part it out, let me know...I may be able to call Kicker and find out if it's a common harness. Any chance you could get the number off the harness itself, I might be able to cross-reference it then. Thanks!

MrSub

13'Silverskeeter

If you can find a cross reference for this harness please post I've been looking for one too I bought the amp/harness from another member and found out the harness was the wrong one for my 13' 4.2 screen radio.

MrSub

This harness goes from the radio 4.2in screen to the amp. Here is the connector that goes between the radio and the harness.

88RedLX

Thanks, that definitely has the connector that I need for my SuperCrew. As expected, the harness appears to correlate to base kit number...DL3Z and amp/dsp unit with the "DL3J" prefix. The base kit I have is the BL3Z kit and has the BL3J14A411 harness.


I suspect it's the same harness as the SuperCrew harness, and if the part number on the amp/dsp is the same (I just looked at your for sale ad, and the amp/dsp is the same)...it would work for me. I'd just need to confirm with Kicker that the SuperCrew and SuperCab use that same harness...but I believe you're correct and they are a common part.


Again, thanks and keep me posted on what you decide as far as selling things separately.

88RedLX

I'll definitely keep you posted if I find anything out from Kicker (I'll call them today). As an aside, I called them yesterday and spoke to Anthony in their Tech Department. He confirmed that they don't sell the harnesses or any components from the kit separately.


I know the connectors are different from the base radio kit (the one I had in my 2011 (BL3Z-18808-G)) and the 2013/2014 trucks with the 4.2" or 8" touchscreen (DL3Z-18808-A). That whole interface is different. From what I've researched and seen first hand, the base kits have a white connector body with a red face (at least mine does and others I've seen in person do). The ones for the 4.2" & 8" touchscreen use a black connector body that is completely different. (like the pics above from Mr. Sub and as you obviously know because that's what you have).


Now I'm just concerned that the pin outs are different between the SuperCrew and SuperCab...but hopefully Kicker can confirm either way. Again, I'll keep you posted.

MrSub

Being as the only difference between a Scab and a Screw with either a 4.2" or 8" touchscreen would be the the length of the cable as the radios are the same and both have 4 6x9 speakers or whatever fords size is. I can see if I can get to my cable in my Screw tomorrow and check the number and see if they match. On my Scab I know I had about a foot or so extra I hide under the carpet. If I don't answer in a few days send me a message, for some reason I am not getting notifications of people replying to the post

MrSub

I went it real quick and check the cable here is a picture. The only difference I see is at the end of the v1p number. It has a D instead of a B.