International: Sharp headlights with built-in LED bars for your 2014 Ford F-150
#131
Senior Member
TNrover, If you did that for $500 you got one heck of a deal. I will have $614 total in mine, thats everything totaled. One thing that would make that truck look better would be a UT plate over that Tiger, Ha! Ha! Ive got relatives in memphis and olive branch,southaven and horn lake MS. We visit once or twice a year, was there this past Thanksgiving. I am in the Chattanooga area but lived over there for a while, I just love the mountains and lakes here. I always enjoy visiting and my brother-in-law is a huge tiger fan. They had a really solid team this past year, the QB is tall as a mountain.
#132
The left headlight has a slightly larger gap between the light and grille. Maybe a quarter inch. It is probably only noticeable if you were the one installing the headlights. The screw holes lined up pretty close so I am not sure why they're off. Not too big of a deal since the lights look AWESOME!
#135
Senior Member
OK will do! I should be installing my set Monday or Tuesday, if its not freezing cold. I ordered the raptor grill light kit too so it should be here by then, I want to do it all at the same time.
Last edited by Koolponycar; 02-17-2016 at 08:19 AM.
#136
Senior Member
Question for you guy who have done this, Do you need to use Dielectric grease on the ballast and bulb connections? And on the headlight outside connections?
#137
Originally Posted by Koolponycar
Question for you guy who have done this, Do you need to use Dielectric grease on the ballast and bulb connections? And on the headlight outside connections?
The following users liked this post:
Koolponycar (02-17-2016)
#138
Junior Member
Ive had mine on for about a week now they look real nice. I got the halogen ones and put hid's in them. Will probably change out the turn signals to led's soon because a day after install one turn signal light (passenger side) was not working properly but other than that i im very happy with theses lights and have gotten alot of compliments.
The following users liked this post:
Koolponycar (02-17-2016)
The following users liked this post:
Koolponycar (02-17-2016)
#140
Senior Member
OK, I did install the Raptor grill light kit this past Monday, but put the spyders off due to waiting on some Morimoto ballast to bulb wires to come in today from the retrofit source as advised from a member here instead of using the oem ones which are real stiff and hard to work with. They are suppose to be longer and more flexible and cost $10 bucks each plus shipping. Now I have to work the next 4 days long shifts so it will be this next Monday or Tuesday when I install the lights, but will get it done and take and post pics then. Some say not to use dielectric grease on the ballast to bulbs that it gets really hot, is that true?