International: Sharp headlights with built-in LED bars for your 2014 Ford F-150
#121
Ive had mine on for about a week now they look real nice. I got the halogen ones and put hid's in them. Will probably change out the turn signals to led's soon because a day after install one turn signal light (passenger side) was not working properly but other than that i im very happy with theses lights and have gotten alot of compliments.
The following users liked this post:
carid (01-13-2016)
#122
Senior Member
Looks great!
#123
This may have already been covered, but i'm still a little unsure. I purchased a set of the black halogen model. I currently have 6000k H13 HIDs in my stock non projector housing. So with that being said can i just order a set of H7 HID bulbs since i already have the HID conversion kit and put in these lights? Thanks
#124
F150 Site Sponsor
Thread Starter
This may have already been covered, but i'm still a little unsure. I purchased a set of the black halogen model. I currently have 6000k H13 HIDs in my stock non projector housing. So with that being said can i just order a set of H7 HID bulbs since i already have the HID conversion kit and put in these lights? Thanks
#125
You will need the following for the retrofit and conversion:
- 1x retrofit halogen to HID harness from The Retrofit Source
- 2x D3S ballasts (OEM will screw in place under the headlight)
- 2X D3S bulbs (any will work, pick the brand and color you like)
- 2x Spyder HID headlights
- 1x retrofit halogen to HID harness from The Retrofit Source
- 2x D3S ballasts (OEM will screw in place under the headlight)
- 2X D3S bulbs (any will work, pick the brand and color you like)
- 2x Spyder HID headlights
#127
I just ordered them from TASCA. Trying to figure out why there is a left and right wire. One is almost twice as much as the other. I just ordered two of the cheaper one. I do not see any reason why they would be any different. I mean the ballasts and bulbs are not right or left specific. Part # DL3Z-13A006-E is the cheaper one.
#128
Senior Member
My lights came in last Friday and one of them was missing a 4 pin connector that goes to the rubber bulb cover, so sent back and waiting on a new set. I have all the other parts you guys listed.
#129
Got mine installed today. The fit is not 100% perfect, but for the price it'll work. The HID projectors do a decent job as well with a pretty good cut off. I think all in I have ~$500 in them. Definitely a good upgrade.
Attachment 415998
Attachment 415998
Last edited by TNrover; 02-16-2016 at 11:35 PM.
#130