Southeast: FS: Undercover Swingcase Toolbox
#1
Senior Member
Thread Starter
Undercover toolbox, drivers side. Was mounted on a 2011 with a 6.5' bed. Mounted for about 2 weeks, barely used, then removed and stored inside. Comes with little tray, 2 keys, and 6 bolts to mount it. Condition is great. Only part that shows any wear is the mounting arm, and it's minimal.
Just realized I wrote the title of another item I'm selling on my name card. Please disregard that.
Not going to ship it, but I can meet you. I'm located in Savannah, which is right off I95 if your going to be traveling for the holidays and want to scoop this up on the way. Thanks for looking.
$80
Just realized I wrote the title of another item I'm selling on my name card. Please disregard that.
Not going to ship it, but I can meet you. I'm located in Savannah, which is right off I95 if your going to be traveling for the holidays and want to scoop this up on the way. Thanks for looking.
$80
Last edited by sandcat1579; 12-18-2014 at 12:15 PM.
#2
Senior Member
These are freakin' awesome, if it was passenger side I'd be all over it!!
#5
Senior Member
#6
Senior Member
Are these boxes Universal to fit any truck? I have a 2013 w/ 5' bed.
How do they install in the bed of the truck, are you using existing holes or do you have to drill new ones?
Thx
How do they install in the bed of the truck, are you using existing holes or do you have to drill new ones?
Thx
Last edited by Floridaguy80; 12-23-2014 at 10:18 AM.
#7
Senior Member
http://www.undercoverinfo.com/models_classic_new.php
And you have to drill holes, looks like he has the self tapping screws in the picture. Also have to remove the tie-down loop.
Trending Topics
#8
Senior Member
Thread Starter
Sorry about responding late. You do need to drill into the side of your bed to install the two different mounts. Also need to cut the plastic bedliner if you have one. I guess they have different part numbers, but I can't see why they would mount different. My dad has a screw with a 5.5 bed and the distance from the wheel well to tailgate are the same. I attached a picture of where the box was mounted and where I cut the liner.
The tie down ring does lose some of its functionally (actually why I don't use the box), but you can flip it and still use it for straps and whatnot. It will just be a lower mounting point.
I'll probably consider shipping eventually, but really would rather not deal with it if possible. We'll see how desperate I get.
The tie down ring does lose some of its functionally (actually why I don't use the box), but you can flip it and still use it for straps and whatnot. It will just be a lower mounting point.
I'll probably consider shipping eventually, but really would rather not deal with it if possible. We'll see how desperate I get.