International: Custom Overhead Switch Panels!
#262
There is the white support that will need to be trimmed with a dremel but it's no big deal at all!
Just make sure to crowd it up into the crease.
I have the 6 switch panel in mine.
Pics of mine & other sunroof installs:
Just email me if you want to order & have any questions.
lethalweapon09@yahoo.com
Thanks,
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
#263
Non moon roof equipped trucks are definitely easier because there is a lot more room plus no support that needs to be trimmed....
But they fit great in that area for us moon roof equipped trucks!
Moon roof equipped 2009-2014 F-150's:
Here are a couple pics of the white support behind the headliner that needs to be trimmed/modified.
You can also slide back your moonroof, stand up in the opening & look down in the opening to see it too.
(It's actually quite easy).
Pics:
But they fit great in that area for us moon roof equipped trucks!
Moon roof equipped 2009-2014 F-150's:
Here are a couple pics of the white support behind the headliner that needs to be trimmed/modified.
You can also slide back your moonroof, stand up in the opening & look down in the opening to see it too.
(It's actually quite easy).
Pics:
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
Last edited by KustomFX; 09-24-2016 at 06:21 PM.
#264
Finally managed to get my switch panel installed and wired. It was definitely nerve wracking to cut holes in the headliner but now that it's done, I don't think I would want the switches put in any other way. Brett worked with me for almost a week just to make sure it was exactly how it wanted it and he knocked it out of the park. Thanks man.
The following 2 users liked this post by cfrench_2009:
KustomFX (09-30-2016),
MrLunchbox (09-30-2016)
#265
Finally managed to get my switch panel installed and wired. It was definitely nerve wracking to cut holes in the headliner but now that it's done, I don't think I would want the switches put in any other way. Brett worked with me for almost a week just to make sure it was exactly how it wanted it and he knocked it out of the park. Thanks man.
That looks great!!! Glad I can help!!
I always say: even though these look great in pics, seeing them in person is even better!!!!
Thank you!
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
#266
Senior Member
Finally managed to get my switch panel installed and wired. It was definitely nerve wracking to cut holes in the headliner but now that it's done, I don't think I would want the switches put in any other way. Brett worked with me for almost a week just to make sure it was exactly how it wanted it and he knocked it out of the park. Thanks man.
#267
Originally Posted by alpinestar1123
Did you have trouble installing the USB switch my mic tuning one was an 1/8 to big. I had to shave it down a little to get it to fit
#268
2nd Amendment Supporter!
Originally Posted by alpinestar1123
Did you have trouble installing the USB switch my mic tuning one was an 1/8 to big. I had to shave it down a little to get it to fit
Originally Posted by cfrench_2009
Yea I had to trim it a little bit to get it to fit
Good info to know & pass along...
Some "non Carling" switches & components may need slight modification to fit.
-Genuine OTRATTW Carling switches fit perfectly.
The switch holes I have the machinist CNC machine in the switch panels are spec'd out to fit the OTRATTW/Carling switches.
If using any other aftermarket switches, some modification may be necessary. .... though many fit with no issues at all.
I had a dual USB port that I used in the early stages of these switch panel designs & although it did fit tight, it did still fit, (though it wasn't the micro tuning brand).
Glad it was still able to still work out for you guys!
Looks great!!!
Last edited by Lethal Weapon; 10-01-2016 at 02:49 PM.
#269
Senior Member
Good info to know & pass along...
Some "non Carling" switches & components may need slight modification to fit.
-Genuine OTRATTW Carling switches fit perfectly.
The switch holes I have the machinist CNC machine in the switch panels are spec'd out to fit the OTRATTW/Carling switches.
If using any other aftermarket switches, some modification may be necessary. .... though many fit with no issues at all.
I had a dual USB port that I used in the early stages of these switch panel designs & although it did fit tight, it did still fit, (though it wasn't the micro tuning brand).
Glad it was still able to still work out for you guys!
Looks great!!!
Some "non Carling" switches & components may need slight modification to fit.
-Genuine OTRATTW Carling switches fit perfectly.
The switch holes I have the machinist CNC machine in the switch panels are spec'd out to fit the OTRATTW/Carling switches.
If using any other aftermarket switches, some modification may be necessary. .... though many fit with no issues at all.
I had a dual USB port that I used in the early stages of these switch panel designs & although it did fit tight, it did still fit, (though it wasn't the micro tuning brand).
Glad it was still able to still work out for you guys!
Looks great!!!
The following users liked this post:
KustomFX (10-02-2016)