Southeast: Custom Autometer boost gauge setup, SCT 3015
#1
Senior Member
Thread Starter
Custom Autometer boost gauge setup, SCT 3015
Two items for sale here.
First is essentially an almost complete kit to install a boost gauge in the vent of a 2009-2014 truck. I had this boost gauge made by the Autometer custom gauge shop to perfectly match the factory needles in a Lariat or Platinum (not FX4 with red needles). I've had many people inquire about this gauge and anyone who rode in the truck always thought it was factory installed. The gauge setup was installed for over 60k miles and worked flawlessly. The gauge has a built-in snubber that alleviates needle flutter. My needle never fluttered very much anyways but that's the snubbers job. Gauge has a 194 LED installed in the back of it.
The links below are the parts I used to make this kit. I bought a Moroso 3/8" fuel adapter with 1/8" NPT female hole (anodized black aluminum) and placed it inline in a brand new Ford hose assembly. You can literally install this in 3 minutes or less with zero questions about rerouting factory hoses etc. It is plug and play. I am even including a fuse box tap (not in the picture) with lead wire I used to run 12V power to the LED.
I did have to cut the existing ferrule off to remove the tubing through the firewall and you cannot reuse the ferrule, but I am including two new 1/8 npt x 1/8" tubing connectors to do a fresh install.
$250 shipped in CONUS. I will ship to our brothers up north if it would clear Customs with no issues. Paypal + 3%. PM me for details.
What it looked like installed in my Platinum
https://www.f150forum.com/f38/ecoboo...4/#post2869644
http://www.jegs.com/i/Moroso/710/653...oductId=746564
http://www.jegs.com/i/Roush-Performa...ductId=1164464
http://www.tascaparts.com/oe-ford/bl3z9b325c
Second item is the SCT 3015 I had on the truck when it was tuned. I bought it new. It is not beat up or scratched. It should have 3 unlocks left because I tuned my 2013 Eco and a buddies 5.0 with it. It has the SCT can tunes on it (which aren't terrible) but you can also load your custom tunes on it.
$175 shipped
First is essentially an almost complete kit to install a boost gauge in the vent of a 2009-2014 truck. I had this boost gauge made by the Autometer custom gauge shop to perfectly match the factory needles in a Lariat or Platinum (not FX4 with red needles). I've had many people inquire about this gauge and anyone who rode in the truck always thought it was factory installed. The gauge setup was installed for over 60k miles and worked flawlessly. The gauge has a built-in snubber that alleviates needle flutter. My needle never fluttered very much anyways but that's the snubbers job. Gauge has a 194 LED installed in the back of it.
The links below are the parts I used to make this kit. I bought a Moroso 3/8" fuel adapter with 1/8" NPT female hole (anodized black aluminum) and placed it inline in a brand new Ford hose assembly. You can literally install this in 3 minutes or less with zero questions about rerouting factory hoses etc. It is plug and play. I am even including a fuse box tap (not in the picture) with lead wire I used to run 12V power to the LED.
I did have to cut the existing ferrule off to remove the tubing through the firewall and you cannot reuse the ferrule, but I am including two new 1/8 npt x 1/8" tubing connectors to do a fresh install.
$250 shipped in CONUS. I will ship to our brothers up north if it would clear Customs with no issues. Paypal + 3%. PM me for details.
What it looked like installed in my Platinum
https://www.f150forum.com/f38/ecoboo...4/#post2869644
http://www.jegs.com/i/Moroso/710/653...oductId=746564
http://www.jegs.com/i/Roush-Performa...ductId=1164464
http://www.tascaparts.com/oe-ford/bl3z9b325c
Second item is the SCT 3015 I had on the truck when it was tuned. I bought it new. It is not beat up or scratched. It should have 3 unlocks left because I tuned my 2013 Eco and a buddies 5.0 with it. It has the SCT can tunes on it (which aren't terrible) but you can also load your custom tunes on it.
$175 shipped
Last edited by cptbimes; 04-08-2016 at 02:36 PM.
#3
Senior Member
Thread Starter
#5
Senior Member
Thread Starter
Made you a YouTube video bro. Link in inbox
#7
Senior Member
Thread Starter
Sale pending on the SCT
Trending Topics
#8
Senior Member
Thread Starter
SCT sold.
#9
oops
Last edited by Daniejw; 06-30-2016 at 09:32 PM.
#10
Senior Member
Thread Starter
Price lowered to $200 shipped for gauge kit.
SCT was sold long ago but I can't edit the original thread for some reason?
SCT was sold long ago but I can't edit the original thread for some reason?
Last edited by cptbimes; 09-12-2016 at 11:36 AM.