Southeast: Bilstein 5100's (front and rear)
#1
Member
Thread Starter
Bilstein 5100's (front and rear)
I've got a set of Bilstein 5100's for the front and rear. 14k on the set.
The front has one collar that I can't get off, so you would have to run on the highest setting. Cosmetically they aren't perfect, but functionallity is 100%
The rear have no issues other than not being cosmetically perfect.
I've attached a picture of them on the truck with 295/60/20's. The rear also has 3" blocks in the pic.
Front - $100 Shipped
Rear - $100 Shipped
The front has one collar that I can't get off, so you would have to run on the highest setting. Cosmetically they aren't perfect, but functionallity is 100%
The rear have no issues other than not being cosmetically perfect.
I've attached a picture of them on the truck with 295/60/20's. The rear also has 3" blocks in the pic.
Front - $100 Shipped
Rear - $100 Shipped
#2
Honey Boo Boo's Child
Are the rears a +1" in length? If so I'm interested. Also, if you can squeeze the nittos and addicts in the box of rear shocks, I'll take those too!
Last edited by RajunCajun84; 09-30-2014 at 09:33 AM.
#5
Honey Boo Boo's Child
Bilstein 5100 rears have more than one length for these trucks. One is stock height and one is +1" for block or AAL applications. The stock length can be used on both applications, but you will not have the maximum travel. When I added my 2" block, I had to compress the leafs in order to install my factory shocks. You will not gain height from these rears, I was only interested if the rears were part no. Bilstein 33-187501 5100. Please correct me if i'm wrong.
Trending Topics
#10
Honey Boo Boo's Child
PM sent