Texas: 2011 Platinum - front end body parts, tow mirrors, emblems, etc.
#1
Senior Member
Thread Starter
2011 Platinum - front end body parts, tow mirrors, emblems, etc.
All parts listed here are OEM parts from my 2011 Platinum - it's white platinum tri-coat, not Oxford white. I replaced the front end with the Harley bumper, grille, etc., replaced the tow mirrors with the smaller mirrors and removed all of the body-side chrome molding. All parts were removed at around 60k miles except the tail lights.
Most prices are obo, make me a reasonable offer. Buyer to pay actual shipping cost on all items.
Tow mirrors:
Scuff on the passenger side mirror:
F150 fender emblems - one piece
Grille:
Lower valance:
Most prices are obo, make me a reasonable offer. Buyer to pay actual shipping cost on all items.
- Trailer tow mirrors: $475 firm passenger side has very minor scuff. Manual fold, manual telescope, power adjust, heated.
- Platinum F150 Fender emblems: $20 one-piece, not the two-piece
- Grille: $325 firm one tiny crack on the side, not visible from the front. 100% complete, even has all 5 tabs intact
- Lower valance: $50
- Front Bumper: $60 (sale pending) bumper is a 6/10 – minor chips expected from a 60k vehicle plus a couple of scratches from bumping into something
- Upper Bumper piece: $40 see front bumper note above
- Bumper Pads: SOLD for the ecoboost; the driver’s side is the plate holder
- Body side chrome molding: $40 SOLD you’ll have to remove the tabs and get some double-sided tape, but this is every single piece needed to give you the Platinum look, minus the tailgate panel. Note that my truck is a screw with the 6.5' bed, so two of the pieces won't work if you have a 5.5' bed.
- Chrome tail lights: $50 SOLD removed at around 10k miles, excellent condition
- Headlights: $75 Not the tinted version. The passenger side has a very minor nick - see pics. I drove with it this way for nearly 2 years and it never formed condensation or got any water inside.
Tow mirrors:
Scuff on the passenger side mirror:
F150 fender emblems - one piece
Grille:
Lower valance:
Last edited by ymeski56; 09-11-2014 at 03:32 PM.
#6
Senior Member
Thread Starter
Body side chrome molding:
Driver's side tail:
Passenger-side tail
Passenger-side headlight
Drivers-side headlight
nick in the passenger side:
Driver's side tail:
Passenger-side tail
Passenger-side headlight
Drivers-side headlight
nick in the passenger side:
Last edited by Chris H; 09-01-2014 at 04:34 PM.
#7
Senior Member
Thread Starter
It's still a work in progress. I'm taking it back to get the bumper alignment corrected and to paint a few of the white "behind the scenes" pieces black like they should have been.
Last edited by Chris H; 09-01-2014 at 04:58 PM.