Southeast: Sub Amp DEI 1100D 1 ohm stable
12-18-2014, 09:16 PM
#1
Senior Member
Thread Starter
Sub Amp DEI 1100D 1 ohm stable
For sale $150.00 DEI 1100D sub amp 1 ohm stable. Works great but I have no need this much power.
SPECIFICATIONSRMS continuous power driven into 4 ohms from 20 to 250Hz @ 14.4 VDC at rated power/load.RMS continuous power driven into 2 ohms from 20 to 250Hz @ 14.4 VDC at rated power/load.RMS continuous power driven into 1 ohm from 20 to 250Hz @ 14.4 VDC at rated power/load.Dynamic power rating (IHF-202 Standard) minimum load.RMS continuous power driven into 4 ohms from 20 to 250Hz @ 14.4 VDC in synced bridge mode (bridged pair).RMS continuous power driven into 2 ohms from 20 to 250Hz @ 14.4 VDC in synced bridge mode (bridged pair).Signal-to-Noise RatioFrequency ResponseDamping FactorCrossoverSubsonic FilterBass EqualizationInput ImpedanceInput SensitivityOutput ImpedanceSupply VoltageFusing and PowerMinimum Cable Requirements (AWG)(Per amp, trunk mounted)© 2002 Directed Electronics, IncDirected model 600d1100d275425wattswattsTHD0.4%0.5%400800wattswat tsTHD0.6%0.7%6001100wattswattsTHD0.8%0.9%7501500 watts watts 800 1600 watts watts 1200 2200 watts watts Greater than 80 dB 20-250 Hz +0, -1 dB 50 (typical) Low-pass 18 dB/octave, variable from 30 to 250 Hz Switchable 30 Hz, 24 dB/octave Switchable 8 dB, centered at 40Hz 20K ohms Variable from 150 mV to 8 volt 1 to 4 ohms 10 to 16 VDC 60A 90A #8 #4
SPECIFICATIONSRMS continuous power driven into 4 ohms from 20 to 250Hz @ 14.4 VDC at rated power/load.RMS continuous power driven into 2 ohms from 20 to 250Hz @ 14.4 VDC at rated power/load.RMS continuous power driven into 1 ohm from 20 to 250Hz @ 14.4 VDC at rated power/load.Dynamic power rating (IHF-202 Standard) minimum load.RMS continuous power driven into 4 ohms from 20 to 250Hz @ 14.4 VDC in synced bridge mode (bridged pair).RMS continuous power driven into 2 ohms from 20 to 250Hz @ 14.4 VDC in synced bridge mode (bridged pair).Signal-to-Noise RatioFrequency ResponseDamping FactorCrossoverSubsonic FilterBass EqualizationInput ImpedanceInput SensitivityOutput ImpedanceSupply VoltageFusing and PowerMinimum Cable Requirements (AWG)(Per amp, trunk mounted)© 2002 Directed Electronics, IncDirected model 600d1100d275425wattswattsTHD0.4%0.5%400800wattswat tsTHD0.6%0.7%6001100wattswattsTHD0.8%0.9%7501500 watts watts 800 1600 watts watts 1200 2200 watts watts Greater than 80 dB 20-250 Hz +0, -1 dB 50 (typical) Low-pass 18 dB/octave, variable from 30 to 250 Hz Switchable 30 Hz, 24 dB/octave Switchable 8 dB, centered at 40Hz 20K ohms Variable from 150 mV to 8 volt 1 to 4 ohms 10 to 16 VDC 60A 90A #8 #4
