South Carolina?!
#1321
Administrator
Thread Starter
Assuming you're responding to my original post- I made this thread about a year and a half ago but it's morphed into an SC chatter thread. I have enjoyed Chucktown so far, that's for sure.
#1322
Senior Member
iTrader: (1)
I wasn't getting proper boost and it was running a bit rough. I could hear the whistle of a vacuum leak and couldn't find it so I went old school with some starte fluid/ether and found it that way. It's the right angle hose so it was nearly impossible to find. It actually cracked on the inside radius of the hose. I used some fuel line and problem solved.
#1323
Member
Anyone in the upstate got some spring compressors I could borrow? I've got some bilsteins coil overs coming in but I need to adjust them hence the need for the compressors.
#1324
Senior Member
If you end up not being able to find any, you can rent them from autozone. I believe you get your money back when you return the also.
#1325
Member
#1326
Senior Member
iTrader: (1)
I borrowed a set from advance auto. Make sure you get the big ones. The coils are big and stiff. When are you planning on doing them? If I'm around you can drive over to my place and we can use the impact tools on them. It'll take about half a day to get done from start to finish. I think you need to unplug the electric power steering or it can cause some problems while banging on the components to get them to let go.
#1327
Member
I borrowed a set from advance auto. Make sure you get the big ones. The coils are big and stiff. When are you planning on doing them? If I'm around you can drive over to my place and we can use the impact tools on them. It'll take about half a day to get done from start to finish. I think you need to unplug the electric power steering or it can cause some problems while banging on the components to get them to let go.
#1328
I apologize in advance for posting this here but no one responded to the thread I created. I have a huge problem with my 06 fx4. Recently under heavy throttle my truck has been backfiring from the exhaust and losing power. It's almost like it is misfiring. I cleaned the mass air flow sensor but didn't help. If anyone knows any solutions it would be appreciated. I also have a k&n cold air intake. Idk if it could be related to that or not
#1330
Member
Curious problem. Wish I had an answer for you.