YELLOW LIGHT lit WRENCH IN THE INSTRUMENT PANEL
#1
YELLOW LIGHT lit WRENCH IN THE INSTRUMENT PANEL
Help desperate. 2004 F150 FX4 3V; with 88000 miles, lit light wrench and check engine. Codes are P0106 and P2102. No accelerate and spend too much fuel and reviewed the TPS and MAF and scanner says work; made me buy IMRC intake runner control, the change and the problem continues. Help me!!
Last edited by Mod (Ret.); 08-08-2016 at 04:18 AM.
#2
Senior
Hope this helps:
P2102 http://upkeep.us/OBDII/OBD2/Ford/piart.php?art=1586
Throttle Actuator Control Motor Circuit Low
P0106 http://upkeep.us/OBDII/OBD2/Ford/piart.php?art=121
Manifold Absolute Pressure (MAP) / Barometric Pressure (BARO) Circuit Range / Performance
P2102 http://upkeep.us/OBDII/OBD2/Ford/piart.php?art=1586
Throttle Actuator Control Motor Circuit Low
P0106 http://upkeep.us/OBDII/OBD2/Ford/piart.php?art=121
Manifold Absolute Pressure (MAP) / Barometric Pressure (BARO) Circuit Range / Performance
#3
05 5.4l 3v s.crew lariat
I went thru something like this
I changed out tps still acted up . Mine an 05 5.4l --cleaned throttle body no result . Read that I had bad year design number on throttle body ,there's some electronics on throttle body that drives little throttle motor , Replaced with new design . Came with new tps too around $200 on ebay . Been good since . Lost all those numbers offhand .
Good luck .
Good luck .