Zax

Hey everyone,
Okay so I found an XLT center console to swap into my truck and get rid of my seat. It is in ohio and I am in Alaska, my cousin is going to go get it for me but he doesn't own an F150 so I am trying to find some instructions to send him on how to get it out... anyone know of any links? I have searched but haven't found it yet. Thanks!

Bell Blue Raider

I believe it's just the 4 bolts that you can see when you open the console lid, I don't know how to disconnect the 12v plug in the back of it though

Zax

Okay that's what I though. I have never actually seen one so I didn't know. lol

Jay215

Lift up the carpet that is in the bottom of the console and remove the 4 bolts. Only lift the console a few inches and look under it. The plug will be under it.

KC-F150

Yeah just like the guys above said, its the 4 big bolts and then once you get them removed lift up the back a little bit and the 12v plug just disconnects and its out!

18_F-150_XLT_Screw

iTrader: (1)

Make sure he gets the brackets for you as well.

Zax

Brackets? I though it was direct bolt in.

sdatrlp23

iTrader: (2)

The '09+ models have a bracket that the console/jump seat bolt to. The '04-'08 models have 4 bolts directly to the ground of the cab

Zax

Okay that's what I thought. Since this is coming from an 08 and I have an 08 it's direct bolt in.

Zax

Well turns out the guy I talked to didn't understand what I wanted...was a seat not a console. My hunt continues. -_-