xd monsters
#1
Junior Member
Thread Starter
xd monsters
hey guys. ive got a 06 screw leveled on 35 inch terra grapplers with stock wheels. im about to order new wheels and want 20x9 XD monsters, only thing is that i want to do a 6 inch lift next summer and i need to make sure these wheels will fit with a 6 incher before i lift it more so i figured id ask the pros. ive never bought aftermarket wheels before so go easy on me haha
#4
I have the Pro-comp 6" lift kit and have 20" Monsters with a -12mm off-set, and they fit on the truck. However, there is some minor rubbing at times when the wheel is turned all the way while at the same time hitting a bump. I thought my wheel was 9"s wide, but last I checked on KMC's website they only show a 20x10" with a -12mm off-set, so either my wheel which was figured to be a 9" wide is actually a 10" wide, or they stopped production of the 20x9" with a -12mm off-set. No matter what, that doesn't affect you, haha. Sorry, for the take over. I'm sure they will fit, but I don't want to be "that guy," so I'll let somebody else comment. BTW, good luck.
Last edited by Nice Sweater; 12-27-2012 at 02:24 PM.
#5
Senior Member
Are your tires a true 35" tire? I'm running 34.3"(295/70/r18) tires on a 2.5" level with a 4.5" BS wheel(Required BS for most lifts) and have no rubbing after trimming. If your going to run a lift at some point a -12offset with a true 35" tire will rub.
#6
Senior Member
If you go with a BDS lift, I can tell you a 5.5" BS will work as well as a 4.5" BS.
20x9, 5.5" BS with 295/65/20 (35.1" x 11.6") 6" BDS.
18x9, 4.5" BS with 37x12.5. Granted its a 8" BDS in this pic but still applies to the situation.
#7
Senior Member
That last part isnt true...Most 6" kits require 4.5" BS to clear the new steering knuckle. This is like what you said Golfer...you were right. If you look at the lift thread a lot of the guys have 35x12.5 with 6" lifts.
If you go with a BDS lift, I can tell you a 5.5" BS will work as well as a 4.5" BS.
Attachment 175888
20x9, 5.5" BS with 295/65/20 (35.1" x 11.6") 6" BDS.
Attachment 175889
18x9, 4.5" BS with 37x12.5. Granted its a 8" BDS in this pic but still applies to the situation.
If you go with a BDS lift, I can tell you a 5.5" BS will work as well as a 4.5" BS.
Attachment 175888
20x9, 5.5" BS with 295/65/20 (35.1" x 11.6") 6" BDS.
Attachment 175889
18x9, 4.5" BS with 37x12.5. Granted its a 8" BDS in this pic but still applies to the situation.
Trending Topics
#8
Senior Member
I have an 08 with the Procomp 2.5 level and Nitto Trails 35x12.50 on 20 inch XD monsters with a mid offset. mine barely rubs
#9
Senior Member