Would a BENT Idler Arm...............
#11
are you still riding with the bent rim? or did you replace it?
edit: also, if you replaced the rim, did you replace the tire? cause the tire will wear to the bent rim, causing a vibration.
edit: also, if you replaced the rim, did you replace the tire? cause the tire will wear to the bent rim, causing a vibration.
Last edited by deviant1; 05-07-2009 at 02:14 PM.
#12
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Cedar River, Jacksonville, Florida
Posts: 218
Likes: 0
Received 3 Likes
on
2 Posts
What would "bend" in the suspension/steering if the wheel did hit a curb?
I've eliminated the rim, it was bent, and replaced, then a couple of wheel balances and alignments.
The bearings will be the next item to check.
#13
I'm currently in Panama and the truck is in Tampa so I'll certainly do that when I return.
What would "bend" in the suspension/steering if the wheel did hit a curb?
I've eliminated the rim, it was bent, and replaced, then a couple of wheel balances and alignments.
The bearings will be the next item to check.
What would "bend" in the suspension/steering if the wheel did hit a curb?
I've eliminated the rim, it was bent, and replaced, then a couple of wheel balances and alignments.
The bearings will be the next item to check.
#14
Senior Member
I'm currently in Panama and the truck is in Tampa so I'll certainly do that when I return.
What would "bend" in the suspension/steering if the wheel did hit a curb?
I've eliminated the rim, it was bent, and replaced, then a couple of wheel balances and alignments.
The bearings will be the next item to check.
What would "bend" in the suspension/steering if the wheel did hit a curb?
I've eliminated the rim, it was bent, and replaced, then a couple of wheel balances and alignments.
The bearings will be the next item to check.
You may need to find a good shop that knows what they are doing.
If you bent the rim !!! did you also bend the hub - spindle? Damage to the wheel brg? Both? I Guess we are talking a 2wd
Last edited by Larryw1; 05-07-2009 at 08:09 PM.