wiring, signals, mirrors!!! help
#11
2005 XLT F150
I will take a pic after work. Here's the link from eBay
http://www.ebay.com/itm/140736277053...053%26_rdc%3D1
#12
Wildbillcody
Thread Starter
Ok on the mirror, I have on one side
Green with a purple stripe, brown w/ a black stripe, yellow w/ a light blue stripe, blue, yellow w/ a red strip, red, space, black
The next row has
Brown, green w/ a white stripe
My truck's plug has
Green w/ purple stripe, black, blue, yellow, yellow, red
The next row has
Black, green w/ white stripe
So the only wire missing is the black one, is that where I need to run a wire spliced from my turn signal wire?
Green with a purple stripe, brown w/ a black stripe, yellow w/ a light blue stripe, blue, yellow w/ a red strip, red, space, black
The next row has
Brown, green w/ a white stripe
My truck's plug has
Green w/ purple stripe, black, blue, yellow, yellow, red
The next row has
Black, green w/ white stripe
So the only wire missing is the black one, is that where I need to run a wire spliced from my turn signal wire?
#14
2005 XLT F150
If u have a multi meter put one end on ground. And turn on your left signal and probe each wire till u get a pulsing from 0 to 12 volts on the meter when n u find it that's your signal wire. Do the same for passenger side.. on MY truck since I don't have the plugs in door ..in kick panel next to e.brake the white / LT blue is the right signal and green/wht. Is the left signal wires. Just tie off the other 2 from bulb or leds to ground