woolybooger

None of my windows will roll down from any door. I have checked my fuses and they look good. I also looked at connections on driver door and they are fine. I did have a problem with window controls at driver side not working to roll down driver side front and back and passender side back that was posititional at times. Passenger front hasnt worked for some time. This leads me to believe it is a wiring probolem. Any help would be appreciated.

techrep

iTrader: (1)

new master panel...

woolybooger

New master panel? What is that? New master fuse panel? I'm just an average Joe who likes to work on his own truck and save a little money here and there.

jb2012

I think he means just the switch panel that is connected to the door. easy swap, but you might want to get a volt meter to see if you are getting power to and/or from the switches

vintageman

Sounds like the master switch at the drivers door to me as well, had that issue with an expedition before. You can test the motors by using a cordless drill battery with a couple wires jumped to your plug that goes to the motor, should go up, reverse the leads window should go down. Thought I was chasing all the window motors till I used the battery for the test. Good luck
Tom

techrep

iTrader: (1)

The master switch panel is the drivers door set of switches...it houses switches that control all the windows...that’s why we call it the master panel...good luck avg joe

woolybooger

Thanks for all the replies!! That helps a lot. I can handle that!