Will rubbing occur on my new sets of rims & tires?
03-29-2013, 11:12 AM
#21
I Like Tires
Yesterday I was thinking about the tire sizes on my new 18" Monster Xd's. Anyone want to give me a little lesson on tire sizes. Right now I have 20" stock rims with 275/55/20R tires. What is 275? What is 55? Do the numbers go up if you want bigger or do they go down if you want bigger tires?
Well in case your on a phone here ya go!
https://www.f150forum.com/f31/lets-e...3/#post2380216
Last edited by BassAckwards; 03-29-2013 at 11:16 AM.
03-29-2013, 11:38 AM
#22
Click the link in my sig!
Well in case your on a phone here ya go!
https://www.f150forum.com/f31/lets-e...3/#post2380216
Well in case your on a phone here ya go!
https://www.f150forum.com/f31/lets-e...3/#post2380216
03-29-2013, 12:15 PM
#23
I Like Tires
The second set of two digits is the aspect ratio or the sidewall height and it's a percentage of the sectional width. So if you have an aspect ratio of 50 the sidewall height is 50% or 1/2 the width of the tire.
03-29-2013, 01:13 PM
#24
Senior Member
i have a 2.5 inch level with 20x10 XD Monsters on 35 inch Nitto Trails and yes mine rub... but mine are bigger
The following users liked this post:
BIGDAWG78 (04-01-2013)
03-30-2013, 12:48 AM
#27
Senior Member
I have 35' BFG TA KOs with a 2' level on a 2WD and have only slight rubbing full left in reverse and it's just the plastic. It all depends on backspacing/offset my friend.
It all depends on backspacing/offset my friend.
Last edited by Rusty Luck; 03-30-2013 at 12:51 AM.
03-30-2013, 10:30 AM
#28