Where to mount switches?
#15
Member
I just did a seat heater installation.
These pictures might help.
Best of luck.
Open the ashtray and use something to gently, but firmly, pry the lower section of the trim panel.
I alternated sides as I worked my way up. There are three clips per side.
If you have the automatic HVAC controls, I found the connectors to be a bit unusual.
The panel simply pops out.
These pictures might help.
Best of luck.
Open the ashtray and use something to gently, but firmly, pry the lower section of the trim panel.
I alternated sides as I worked my way up. There are three clips per side.
If you have the automatic HVAC controls, I found the connectors to be a bit unusual.
The panel simply pops out.
#17
Senior Member
Sorry for the long wait on this response, didn't even realize you posted a comment to me. Ha I just happened to be looking back for a picture of my switches to share with another member. That pic of the edge was actually a different members truck, I have the dash pod for my Gryphon. If you look at my other post on this topic you'll see that I have my CB mounted where that other picture had the edge. Thanks for the offer man, we'll have to get us Minnesota's together some time and show off a few trucks when we actually have some decent weather!