Wheel bearings
#11
Your vacuum lines, IWE solenoid, and hub can all be shot and the 4x4 will most likely still work. It depends on the exact problem with the hub.
#13
So I jacked it up started it and the Cv spins with the wheel. same as without the motor on. So my question is I need to replace the wheel bearing hubs because my drivers wheel can wiggle back and forth up and down and should i replace the locking hub actuators?
#14
Don't know yet. Now you need to get a vacuum tester and test your vac lines.
#15
Look your doing awesome with helping me but im not worried about that right now I don't have a vehicle to drive and just need to replace the hub then I will test all the other stuff. I want to get two hubs for both sides. If I order two of these will these work or is the sides different as in will I need to get a left and right.? Moog 515046 Wheel Bearing and Hub Assembly https://www.amazon.com/dp/B000CEZXVA..._w-3VxbB8KD828
#16
Wait, if your wheel is wiggling side to side and up and down, have you also checked your steering and suspension?
#17
Yes sir but I went in from the inside of the wheel and did it and the hub is moving inside the spindle... I bought a new vct solenoid to to fix my rough rpms that I get sometimes