What did you do to your 11th gen today?
#7881
Broke my driveshaft. I made a thread for it "2004 f150 xlt 4x4 6.5 bed Can anyone lead me to a replacement rear driveshaft. Mine had to much torque and broke. I had to sawzaw it to move my truck."
#7883
Installed new rear differential pinion gear seal. Pretty straight forward job and used the directions I found on the forums!
New OEM stereo with AUX plug in. The buttons on my original one were all worn off. Looked like crap.
Installed new drivers seat foam and upholstery. I've been wanting to do this for awhile now and happy with the outcome!
New Rancho QuickLift 9000 suspension all around!
New OEM stereo with AUX plug in. The buttons on my original one were all worn off. Looked like crap.
Installed new drivers seat foam and upholstery. I've been wanting to do this for awhile now and happy with the outcome!
New Rancho QuickLift 9000 suspension all around!
#7885
Moderator (Ret.)
To snap or twist a driveshaft...either the U-joints were frozen, backed up to a wall, or you have a god fearing large amount of torque being built up.
#7886
Not today but this weekend, I mounted new tires.
275/65/18 (This is the same as stock)
When my wife becomes a stay at home mom I get to put 33s or 35s on it as it won't be a DD anymore.
Then after the pic I put some oil to temporarily fix the my trim pieces from looking white. If this don't hold up for a while, I'll prolly just take them off and paint them. I was just lazy
275/65/18 (This is the same as stock)
When my wife becomes a stay at home mom I get to put 33s or 35s on it as it won't be a DD anymore.
Then after the pic I put some oil to temporarily fix the my trim pieces from looking white. If this don't hold up for a while, I'll prolly just take them off and paint them. I was just lazy
#7887
Member
I got my ebay cheapo LED H13 bulbs today. These are exactly the same as 4x4truckleds sells. The box is the same, the print on the box, the silica packs, the baggie the allen wrench comes in, everything is the same. The lights and ballast have the same exact castings and markings on them. Hi/Low function is perfect as well. The difference? These cost me $50 shipped as the seller took my offer. 4x4truckleds are $150 plus shipping.....
H13 72W CREE LED Headlight Kit Lo or Hi Beam Bulb Car Truck Motorcycle | eBay
H13 72W CREE LED Headlight Kit Lo or Hi Beam Bulb Car Truck Motorcycle | eBay
The following users liked this post:
Summers22 (08-29-2016)
#7888
My truck crapped out on me last night, had to have it towed home. It'll shift into gear but won't engage, linkage intake and shifting, transmission will shift into gear, just won't engage into drive.
Check out my post here, need all the help I can get!
https://www.f150forum.com/f4/need-he...5/#post4919141
Check out my post here, need all the help I can get!
https://www.f150forum.com/f4/need-he...5/#post4919141
#7889
My truck crapped out on me last night, had to have it towed home. It'll shift into gear but won't engage, linkage intake and shifting, transmission will shift into gear, just won't engage into drive.
Check out my post here, need all the help I can get!
https://www.f150forum.com/f4/need-he...5/#post4919141
Check out my post here, need all the help I can get!
https://www.f150forum.com/f4/need-he...5/#post4919141
I have no clue, Sorry about your tranny headaches At least it sounds like your in good hands and you have a truck to drive in the meantime.
#7890
Senior Member
Today she sits at home as I drove the wife's explorer to work. 32 miles one way she did really good considering it had 213k on the clock motor only has 100K tho. Short on funds till Friday and her truck gets better millage. Sure did miss driving my baby this morning tho