Turn Signal Issue After Installing LED
#11
Junior Member
Thread Starter
I also just learned it could be a bad $30 brake fluid sensor. I wonder if there's a way I can test this sensor with a voltmeter before purchasing it...
#12
Senior Member
If it all worked fine before LED install I would suspect something with the LEDs is causing this. The cheapest thing to do is put all the old bulbs back in and see what happens.
#13
cant find turn relay
hello I have been reading you guys posts but I still have been unable to find the turn relay in my 09 f150 I'm beginning to think I'm blind as a bat I need some help p.s. I tried all suggestions I read to find it . oh yeah the dealer ship says that it is in the fuse panel. NO not that I have found
#15
Senior Member
Not sure about the 2009s but on my 2004, I took out the side panel that is on the end of the dash (drivers side, faces the drivers door). Had the stock blue flasher module right there, reached in, took old one out, put new one in.
The following users liked this post:
fordfanf1502009 (07-03-2016)
#16
Senior Member
I believe the 09+ are different and you'd need to add resistors on those trucks. Have a look on the 09-14 part of this forum to verify.
The following users liked this post:
fordfanf1502009 (07-04-2016)