rocketrn25

So my truck just up and died today and i checked the fuse for the fuel pump and it was blown. When I replaced it it blew again, then I put a 25 amp in and it blew, then a 30 amp and it blew.

Has anyone had this problem and do you think it could just be a bad fuel pump or is it some crazy wiring issue that will cost me an arm and a leg to have them track down and fix??

bobkyle2

Check the fuel pump module.. Near the spare tire under the rear of the truck

rocketrn25

Is that something that I can tell if its bad or just replace it and see if that does it? And how hard it it to get to and replace?

bobkyle2

Its easy to get too.. You can take it down and look at it and tell its bad... You can search on the forum here.. fuel pump modul... Theres tons of them that have failed

rocketrn25

thanks, ill search for it. Im hoping its something easy to fix

06H0040

Check this link out for what you will be looking for. I just posted this and it did'nt get much attention. Just went through the same thing on my friends truck and my module on mine is not any better than his only I have no driveability issues yet. Good luck finding a module if you are in a rust belt state. They are like gold and on back order. Call ford and let them know you are upset if this is your issue.

https://www.f150forum.com/f4/driveab...-module-92329/

rocketrn25

Please call Ford Coporate Customer Service and voice your concern with our trucks Fuel Pump Driver Module. The number is 1-800-392-3673. You will need your trucks VIN number and if you have already replaced the FPDM keep your reciept as if they do issue a recall you can be reimbursed if you can prove it has been changed already.

Called the number and notified them! This should be definate recall as its an obvious problem!!