Troyer Performane UD Pulley kit
#1
Senior Member
Thread Starter
Troyer Performane UD Pulley kit
I know this topic is beat to hell but iv done research and found mixed reviews.
Any way i have been looking at them for a while and finally bought them today.
Im sure they come with instructions, but i have some questions.
First i have a clutch fan, the guy with TP said i will not have an issue with over heating or my lights dimming, but has anyone had any experience with them?
Second, i will be installing the(i am mechanical inclined)so i shouldn't have a problem, but i have heard that i need to use new bolts for certain things but i dont know what?
Third will i have problems with the truck idling? and do i need to change shift points and what not.
and i have a 2004 5.4 f150 a hypertech tune, air aid, optima battery and everything on my sig.
Thanks in advance!!
Any way i have been looking at them for a while and finally bought them today.
Im sure they come with instructions, but i have some questions.
First i have a clutch fan, the guy with TP said i will not have an issue with over heating or my lights dimming, but has anyone had any experience with them?
Second, i will be installing the(i am mechanical inclined)so i shouldn't have a problem, but i have heard that i need to use new bolts for certain things but i dont know what?
Third will i have problems with the truck idling? and do i need to change shift points and what not.
and i have a 2004 5.4 f150 a hypertech tune, air aid, optima battery and everything on my sig.
Thanks in advance!!
#2
Hey I installed these on my truck about 2 months ago. He lied the lights will dim in gear at a idle a little bit but no big deal. I haven't had any over heating at all, I did put there e fans in at the same time. Go to the parts store and rent a fan puller it will make the job very easy. The new bolt comes with it for the new damper. Make sure you put high temp silicon on the key way. I did add new exhaust e fans airade intake under drive pulleys all at the same time so not sure on performance increases just from them.
#4
Senior Member
Thread Starter
Hey I installed these on my truck about 2 months ago. He lied the lights will dim in gear at a idle a little bit but no big deal. I haven't had any over heating at all, I did put there e fans in at the same time. Go to the parts store and rent a fan puller it will make the job very easy. The new bolt comes with it for the new damper. Make sure you put high temp silicon on the key way. I did add new exhaust e fans airade intake under drive pulleys all at the same time so not sure on performance increases just from them.
#5
I have had troyer UD pulleys on for about a year now and not a single problem. My lights do not dim and I have Troyer E fans, in dash navi, 1000w amp pushing 2 10s, radar dector hot wired to the truck, and HID in both headlights and fogs.
With a clutch fan it will spin no different then stock.
Idle is perfect
Use the bolt that comes with to install.
Took me about 45 min to do the install
With a clutch fan it will spin no different then stock.
Idle is perfect
Use the bolt that comes with to install.
Took me about 45 min to do the install
Trending Topics
#10
Originally Posted by lbajo1
Ok sweet, how do you like those fans? have the relays fried? i hear they like to go bad on those TP kits.