Trick to getting the top 2 trans bolts out?
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Clifton NJ
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Trick to getting the top 2 trans bolts out?
Having a hard time reaching the top two bolts on my trans (05 4R75E)
Any tricks?? pull the rear trans cross member and the tail didnt drop at all.... Loosen the motor mounts??
thanks
New to F150 Forum so if this is in the wrong spot let me know... Pirate4x4 would burn me alive!!
Any tricks?? pull the rear trans cross member and the tail didnt drop at all.... Loosen the motor mounts??
thanks
New to F150 Forum so if this is in the wrong spot let me know... Pirate4x4 would burn me alive!!
#2
6" fabtech+ 3" leveling
not sure on how much it is the same, but shouldnt be too different, but when i had to pull my engine on my lightning, i had to do---
socket
universal
then like 3 feet of extensions to get the right angle to get it off
hope this helps
socket
universal
then like 3 feet of extensions to get the right angle to get it off
hope this helps
#3
Senior Member
I haven't pulled an 04 and up but previous years I used pretty much the same combination as lifted07.
Universal joint and long extension. Them being pretty much in the firewall makes it tough.
Good luck and let us know how it goes.
By the way welcome !
Hang around you just might like it here.
Universal joint and long extension. Them being pretty much in the firewall makes it tough.
Good luck and let us know how it goes.
By the way welcome !
Hang around you just might like it here.