Tire and wheel fitment guide for 04-08
05-31-2009, 11:42 PM
#11
only pussies wear bowties
ok well i just oreder 3 inches for the front an 2 inches for the back. im going to have to get the money for the wheels and tires but its a good start to fitting on my 35x12.50 for sure.
06-01-2009, 09:38 AM
#12
Member
Do you know if these specs will work for 20" wheels as well? I recently purchased a 2006 FX4 and the previous owner opted for the 20" wheels. Will I be able to run 35x12.50 on these stock 20' wheels?
The following users liked this post:
Randy Phelps (02-03-2023)
The following users liked this post:
Randy Phelps (02-03-2023)
06-01-2009, 05:15 PM
#15
2020 Sport
This is a great guide but please allow me to make everyone laugh when I ask this question:
I have a stock 05 4x4 and I'm putting on a 2 1/2 level. Going off of:
When you look up tires you see: 295/75/16 Load "D" O/D 33.3 as shown on http://www.rimzoneonline.com/nittoterragrappler.htm
Can someone educate me on the conversion for 35X12.5" on stock 17 rims?
I have a stock 05 4x4 and I'm putting on a 2 1/2 level. Going off of:
On a leveled truck(2" kit and larger) you can run 35X12.5" tires on a 4WD and 33X12.5" tires on a 2WD truck, using the stock wheels.
Can someone educate me on the conversion for 35X12.5" on stock 17 rims?
06-01-2009, 09:59 PM
#16
Senior Member
This is a great guide but please allow me to make everyone laugh when I ask this question:
I have a stock 05 4x4 and I'm putting on a 2 1/2 level. Going off of:
When you look up tires you see: 295/75/16 Load "D" O/D 33.3 as shown on http://www.rimzoneonline.com/nittoterragrappler.htm
Can someone educate me on the conversion for 35X12.5" on stock 17 rims?
I have a stock 05 4x4 and I'm putting on a 2 1/2 level. Going off of:
When you look up tires you see: 295/75/16 Load "D" O/D 33.3 as shown on http://www.rimzoneonline.com/nittoterragrappler.htm
Can someone educate me on the conversion for 35X12.5" on stock 17 rims?
The following users liked this post:
Arizona Tumbleweed (02-07-2022)
06-02-2009, 06:27 AM
#17
2020 Sport
Going off what you said I don't see that selection here:
http://www.rimzoneonline.com/nittoterragrappler.htm#17
However I do see "305/70/17 Load "E" O/D 33.8" - Is this the same but smaller?
And what does Load E and O/D mean?
06-03-2009, 10:51 PM
#18
Junior Member
Join Date: May 2009
Location: LI NY
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
i know this is a little off topic than the tire size and type you all are talking about but do you know if i can run 285 45's on a 22" rim without much rubbing. the truck height is stock f150 screw
06-04-2009, 05:53 PM
#19
Junior Member
Join Date: Dec 2008
Location: Pensacola, FL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Replacing the stock tires
I've been reading these threads for months. Let me try to get this clear once and for all: I can put a 33x12.5 or a 35x12.5 on my stock 08 4x4 20" rims and there will be NO RUBBING? I talked to the tire stores and they always wanna sell me something in stock and push the 285/60r20 on me. I really want a nice beefy tire that wont rub and i don't have to cut anything and keep my stock rims. Any help much appreciated. Thanks guys! 
06-04-2009, 11:24 PM
#20
I've been reading these threads for months. Let me try to get this clear once and for all: I can put a 33x12.5 or a 35x12.5 on my stock 08 4x4 20" rims and there will be NO RUBBING? I talked to the tire stores and they always wanna sell me something in stock and push the 285/60r20 on me. I really want a nice beefy tire that wont rub and i don't have to cut anything and keep my stock rims. Any help much appreciated. Thanks guys!
this truck had a 2" leveling kit and 285/65/20's
The following users liked this post:
6511williams (01-26-2013)