techrep

iTrader: (1)

Your welcome..

Huntman777

So I just measured the blocks on mine are 2" so thats only 3/8" bigger than factory. There has to be an extra leaf or something else to lift the rear because there is atleast a 2" spacer in the front and I still have 2" of rake

Huntman777

With a 12.25 inch wide tire on the stock wheels would it stick out past the fender wells?

techrep

iTrader: (1)

No

ak_cowboy

Depends on which stock wheels you have. My 295s (11.6") stuck out about 1/2 an inch from the fender on stock 17" Steel XLT wheels.



Looks like this after driving down some muddy roads

Fbcoach

Almost looks like you have a small spacer. I haven't seen that on a stock wheel without them

4.6owner

I just installed the 275/70/18 Falken Wildpeak AT3W's with some 18x9 Method Racing Mesh Wheels. Fit is perfect. No rubbing, no matter what I do, full lock to lock steering even off camber. This is with a 2" Autospring leveling kit in front. Here are a couple of crummy pics

techrep

iTrader: (1)

Now paint those fender flares..

4.6owner

I picked up some detail king trim kote that is going on this weekend. Permanent, UV stable dye. Arrived yesterday so I didn't have it in time for the pics

techrep

iTrader: (1)

Let me know how that works for you...