Originally Posted by V8neverlate

In regards to the first post on this thread, with the back spacing, do you generally have the same backspacking for all 4 wheels?

Originally Posted by CRF450

I have an 06 Screw 4x4 with 2 inch level. I currently have 285's and want to go bigger if possible. I don't mind minor trimming but my concern is rubbing on the control arm or frame and ruining new tires.

Can i fit 315/70 R17's or 35/12.50 R17's with no rubbing on 17x8 wheels with 4.5 inch backspacing and 0 offset?

I'm not too savvy with wheel specs so any help is appreciated.

Originally Posted by CRF450

Bump. Looking to pull the trigger on tires soon.

Originally Posted by Fbcoach

That a good call. You'll be fine with the 295s. There's a few dudes on here running the same set up and they absolutely love them. It'll look good with that +18 offset, too.

Originally Posted by Fbcoach

I'd go with 295/70. It's about 34" tall and close to 12 wide. If you had an extra half inch on the level you'd fit a 35x12.50.

Originally Posted by CRF450

I thought about that but BFG KO2's don't come in 295's. They do have 305's but cost more than 315's.

My level kit is the Icon Vehicle Dynamics (formerly Donahoe Racing) adjustable coil overs. They are set at about 2" but have room to go 2.5" or so.

Originally Posted by Redbusa06

How about my gears with those tires, think I'll be ok running 3.73?

Originally Posted by Fbcoach

If you can go 2.5 do it. Just for the extra clearance.