F150XLT08

-24 offset and 4.5 4X4

tareed94

That tire is about 33.4" tall, 12.7" wide. On a 4X4 that could clear on stock rims, but adding the stance I would advise leveling it also. You may have to trim a little of your fender well liner and may have to trim a little of your bumper valence. Both are easy and not noticeable. I could be wrong on the trimming though. I've got equivalent to about 7" of backspacing with a 35x12.5 tire on stock rims running 1.5" spacers. I had a little bit of trimming but it isn't noticeable.

F150XLT08

Plan on the rough country level kit. Its in the mail so as soon as it gets here the wheels and rubber go on.

Tomleo67

Planning on upgrading my stock steel XL wheels. They are 17". Can I put some XLT's on this 4x2? anything specific I should or shouldn't use? Should I stay with 17''? Are all the F150 bolt patterns the same?
Thanks in advance!

05f140

18x10 +10 would a 285/65/18 tire work? Little to no offroading so I don't really care about rim protection.

Daniel Richard

Okay, so I have a 2004 f150 lariat. I am going to put a 2.5 inch leveling kit on it, and I want to run 33 12.5 20, or 305 55 r20 tires. I would prefer the second, in a nitto terra grappler, or Falken Wildpeak AT. I need to know what offset and backspacing I would need to run this size tire and for it to look great, with absolutely no rubbing or shaving of the truck itself. Thanks.

Allinkdupp

depends on the look you want, if you want an aggressive stance go +1 bs 5

BoinkSwag

Thought a visual reference might help some of you guys and its a chance to show off the new setup : )

2004 F150 SCREW AS 2" level
Mickey Thompson Baja Classic III
BF GoodRich AT KA02 275/70/R17

nmis300

I have a set of 17x8.5 Method NV's that I bought from a Raptor owner. The wheels are a 0 offset with 4.75" of backspacing. Will these fit on my 05 FX4. I have a 2.5" level currently.

techrep

iTrader: (1)

you alredy got an answer in your other thread.. no need to ask multipal times..yes those wheels will fit..