xtreme02gt

I have a 04 FX4 with the Rancho quick lift struts and 9000's in the rear, I am wanting to buy a set of Fuel Hostage 20x10's with -12 and 4.56 backspacing with 33x12.50x20's will I have any rubbing issues?

devildog56

thanks guys. I appreciate it!

tkm3d1a

what do you guys think about Mickey Thompson Baja MTZ LT315/70 R17 fitting on a 06 4x4 w/ 2.5" level with stock 17" chrome xlt wheels? I know what the thread says I just dont wanna drop the coin on the tires and have serious issues :/

twittyaustin

Souldnt have problem. Lots of people run rhis setup

blackstx4x4

I have a question. I am looking at getting xd addicts in 17x9 with 5.70" of BS. Looking at the front end when at full lock it seems that the tire is very close to the upper control arm with my 285 70 17 falken wildpeak ats. Question is will I have rubbing issues on the upper control arm with mire bs than factory in a 17" wheel? Truck also has Rancho quicklifts in the front

BA923

I have a 2wd 7lug f150 with 35s on stock wheels with a level how much back spacing would I need for it to stop rubbing you think. I know I need after market rims and im looking at a set now and just wondering if the back spacing on them is right or close.

thanks

Turbo eh

Hey guys, will a 275 65 20 work a 2008 F150 without a leveling kit, or will it rub?. Thanks

dufx4

It will be close. That's a 34 inch tall tire I think you could probably squeeze it in though. Also depends if you are 2wd or 4wd.

Golferguy667

Agreed it'll be close but it should fit. Worst case scenario, you gotta pay an additional 80$ fora leveling kit

cdnova77

I need some quick advice! Can i run a 17x7.5 rim with 6 inch backspacing on 285/70/17 tires? Wasnt sure if the 6in backspacing would cause anything to hit the control arms? Thanks for the help in advance!