ebp99si

Ive done some searching, and haven't came up with too much. Some say they will be fine, and others say they will rub.

I have a couple of options im looking at.

1. 35x12.50r20 toyo open country mt with half tread for $400. plan on putting them on my oem fx4 wheels. will they rub?

2. 20" x 10" tuff 6mm offset wheels with 35x12.50r20 nitto trail grapplers for $1500.

i ordered 6mm spacers to be on the safe side. btw, my truck is an 06 f150 Screw with 2.5" leveling kit, 1" block in the rear, and airbags

techrep

iTrader: (1)

The Toyo's on your stock wheels will require some trimming...the Trail grapplers measure 13.4 wide and are gonna rub...without the proper back spacing on the wheel..

ebp99si

Im picking up the toyos tomorow. Is it just the valance that will need triming? I also got 1/4" spacers just in case they rub the upper control arm

techrep

iTrader: (1)

Good luck..

ebp99si

Got the 35x12.50r20 toyo open country mt's mounted yesterday. Had to use the 1/4" spacer and minor trimming of the front valance. But it turned out great

bourgeois1269

Nice !

techrep

iTrader: (1)

love that look on stock FX4 wheels...

Fbcoach

Nice looking rig!