tinted tails and updated pics
#2
Senior Member
looks pretty good man now you need some tinted headlights the only thing is at night its going to be hard to see in reverse since you painted over the reverse light but then again maybe not!!
#4
Senior Member
Thread Starter
yea ive been thinkin about mountin some off road lights under the bumper and wiring them into the reverse lights, and does anyone know if they make brighter bulbs for the tail lights lol
#5
Senior Member
Thread Starter
yea i feel ya, im not the best painter, i could be better but i lack the place to do it, i did sand it some looks alot better than it did at first, i tried to clean them and everything during prep, but i kinda like how they look now i might just leave them like they are lol
#6
RejectedReject
Looks good man. You used Niteshades I take it? I did mine a couple of months ago and Have left them the "satin" finish also. I first did a test on the 3rd brakelight and am glad I did. Here's some pics of mine. The first time I did the 3rd I put on 5 coats of NS and taped off the clear sections. It looked like hell when I was done so I sanded it all down and started over this time only 1 coat of NS on the whole light and 3 coats of clear. The tails are 2 coats NS and 3 coats clear.
Here's how I started the first time....The wrong way!
results 5 coats NS 2 coats clear
Back to the start
1 coat NS and 3 coats clear
Tail's start
Finish
Everything together
Here's how I started the first time....The wrong way!
results 5 coats NS 2 coats clear
Back to the start
1 coat NS and 3 coats clear
Tail's start
Finish
Everything together
Trending Topics
#8
The VHT stuff isn't hard to use. Are you guys going for the satin look??? If so, I suppose that's cool...
If not, then some clear may help that dull look you're all getting. Fordfwd08, those are pretty dang dark man! How well can you see the reverse lights???
Here's mine I did about a month ago...
That's about three coats of Night Shades and two coats of gloss clear with the reverse lights taped for two coats of the night shade. No sanding, with just minimal prep. I cleaned the tails with a little acetone and windex.
If not, then some clear may help that dull look you're all getting. Fordfwd08, those are pretty dang dark man! How well can you see the reverse lights???
Here's mine I did about a month ago...
That's about three coats of Night Shades and two coats of gloss clear with the reverse lights taped for two coats of the night shade. No sanding, with just minimal prep. I cleaned the tails with a little acetone and windex.
#9
RejectedReject
I like the "flat" look. The gloss is all from the clear. I did a couple of light coats to keep them looking flat. If I wanted I could wetsand and throw on a thick coat and they would be nice and glossy. Your's came out real nice Darth Bama!