Tinted My Tail Lights
#1
Senior Member
Thread Starter
Join Date: Dec 2009
Location: High River, Alberta, Canada
Posts: 141
Likes: 0
Received 3 Likes
on
3 Posts
Tinted My Tail Lights
Just finished tinting my tail lights let me know what you think
In progress
Close Up
First one done
In progress
Close Up
First one done
Last edited by wyattjo; 06-14-2010 at 07:29 PM.
#3
Senior Member
Thread Starter
Join Date: Dec 2009
Location: High River, Alberta, Canada
Posts: 141
Likes: 0
Received 3 Likes
on
3 Posts
its fairly easy... most people sand them lightly with 1500 grit first but i just washed them then wiped them with rubbing alcohol... then i taped off the reverse light and sprayed a light coating on and let it dry and kept spraying a little more on until it was how i wanted it... then i let it dry fully and peeled the tape and put a heavy layer of clear on it as thats what gives it the most shine... in total from start to finish it took me about 2 hours including drying time... i used vht niteshade for the tint
#6
Looks really good! Good job.
I just finished mine. I used three coats of night shade and 4 or 5 coats of clear coat.
I also did my third brake light but have to sand off the paint as I had a run in the paint.
I just finished mine. I used three coats of night shade and 4 or 5 coats of clear coat.
I also did my third brake light but have to sand off the paint as I had a run in the paint.
Trending Topics
#8
Member
those look really good, it looks like you did a really good job. When i did mine i didnt use a clear, i wetsanded between coats and then did a lot of buffing, came out as shiny as any other vht lights ive seen.
#9
Senior Member
Join Date: May 2010
Location: Washington
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Looks great, Good job. I am definatley going be doing mine soon .
Did I miss it but how many coats did you put on?
Did I miss it but how many coats did you put on?
Last edited by 08Screw; 06-15-2010 at 01:14 AM.
#10
Member
Join Date: Jan 2009
Location: west jordan, utah
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
wishing i woulda not tinted the rev light on mine. but good ole vht, i love mine, i may go back over mine darker... i did alot of rattle can automotive clear on mine, seems to help with the durability... yours def look good man..
anyone tryin to vht thiers, i recomend setting em side by side and spraying both at once, that way you ensure there even
anyone tryin to vht thiers, i recomend setting em side by side and spraying both at once, that way you ensure there even
Last edited by RottenApple; 06-15-2010 at 01:50 AM. Reason: added stuff