throttle resonse fixes 5.4
#391
TOTM November 2019
iTrader: (2)
Okay, and I did both last night, first the 3 bolts on the pedal then the Diamondbird, and wouldn't you know it, its flat out pouring rain......FML. I really am not expecting much of a difference as the truck runs perfect and seems to have plenty of get up and go.
#394
Senior Member
Thread Starter
Mine used to be terribly slow. I would push the pedal and have to wait to go. Not anymore though.
Sounds lkke you didn't have a problem to begin with
Sounds lkke you didn't have a problem to begin with
#395
I joined this site on 09.12.2012 and have done a lot of reading since.
Yesterday i stumbled upon this thread and couldn't believe i didn't see it before or hear it mentioned in any other threads. Can this be added maybe not as a sticky but to one of the other stickys?
I did the key/pedal trick and it definitely worked. If you mash the pedal half way or all the way it does jump more than it did. I will soon be changing the plugs and might also do the throttle body and sensors while there...
Thank you Diamondbird!
Yesterday i stumbled upon this thread and couldn't believe i didn't see it before or hear it mentioned in any other threads. Can this be added maybe not as a sticky but to one of the other stickys?
I did the key/pedal trick and it definitely worked. If you mash the pedal half way or all the way it does jump more than it did. I will soon be changing the plugs and might also do the throttle body and sensors while there...
Thank you Diamondbird!
#400
Correct.. i'd adjust tighten your throttle cable on your cbr as well.. lots of people forget that it should be tightened and loss tons of throttle response.. Wish i still had my gsxr 1000 k7... wrecked it this summer broke my back, arm, two toes and 8 ribs... still miss it though..