stevo

I washed the engine compartment of my 2004 f150 while it was running, after I finished I shut the truck off which turned out to be my second mistake(my first was washing the engine compartment).Now I am getting a variaty of codes ive tried blowing out all of my connectors(sprk plug leads,tps,throttle body act,mass air flow)but I still get the same result it will not start and pops back through the intake. after speaking with a local mechanic he advised me my problem is probably my throttle body based on the codes I am getting.wondering if anyone else has any advise? this is a list of the codes that are showing up on my programmer,p0121-throttle/pedal position sensor a circuit range performance,p0221-throttle/pedal sensor/switch b circuit range performance,p2104-forced idle,p2106-forced limit power,p2111-throttle actuator controll system stuck open,p2135-throttle/pedal position sensor switch a/b voltage correlation.

any info would be helpfull thanks!!

bambo2888

tps --- go get a new throttle body from ford. had the exact same codes myself after doing the exact same thing.