Tensioner pulley?
#1
Tensioner pulley?
I have a rattling (bb's in coffee can/bad bearings) that is happening intermittently and can't figure it out. Was told cats were bad- replaced but still occurring. It's not heat shields or iwe. Will the tensioner pulley rattle at different times instead of whine? Tracking down this kind of stuff is annoying and near impossible by yourself. It only happens when driving/cruising and usually only when under slight load. Any deviation on the gas pedal and it goes away.
#2
Mark
iTrader: (1)
They tend to whine...BB's in a coffee can sounds like IWE ...
#4
Mark
iTrader: (1)
Yes !! Put it in 4H while it's making the sound and see if it goes away... just make sure your speed is below 55mph and your driving straight, No turns.
#6
Mark
iTrader: (1)
Let us know the results..
#7
So that was it. Started rattling and I switched to 4hi stopped immediately. So is it the actual iwe that needs to be replace or is it a solenoid? Thanks for your help tech rep!!!!
Trending Topics
#8
Mark
iTrader: (1)
solenoid ... Rock auto... try this first..
DORMAN 600400 {#6L349H465BA, 6L3Z9E441A, 6L3Z9H465B, E8AE9H465BA, E8AZ9H465B} 4WD Vacuum and Emissions Purge Solenoid More Info
$14.32
DORMAN 600400 {#6L349H465BA, 6L3Z9E441A, 6L3Z9H465B, E8AE9H465BA, E8AZ9H465B} 4WD Vacuum and Emissions Purge Solenoid More Info
$14.32
#9
I'm at my hunting club now (1st day of bow season in Alabama) thought I would run into town and get one from advance but they want $43. I'll order it and fix it when I get back home.