Temperature blend issues
#1
Junior Member
Thread Starter
Join Date: Oct 2012
Location: Palmer, AK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Temperature blend issues
I've been trying to search it out but am having a hard time nailing it down. My automatic air control is stuck on hot. Doesn't matter if it change it down to 60 still blows hot. This leads me to think its my blender door. It sounds like the motor is still working though. Which part do I replace? I talked to ford but that was pointless. Also they said they don't make just the blend door. Any help would be much appreciated.
06 f150 screw fx4
06 f150 screw fx4
#5
Junior Member
Thread Starter
Join Date: Oct 2012
Location: Palmer, AK
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Yeah the ac kicks on and everything. Just the temperature coming out doesn't change. That's why I thought it was the blend door itself. Also when I change the temperature you can hear a motor trying to run. That's why I wanted to make sure I changed the right part.
Yes automatic climate control.
Yes automatic climate control.
#6
Former Powerstroker
The blend door rarely goes bad, the motor has a shaft that can strip out. or internally the gears strip out.
Remove your radio and glove box after that its a 5min swap.
Remove your radio and glove box after that its a 5min swap.