Suspension torque settings
#1
Member
Thread Starter
Join Date: Feb 2012
Location: Independence, Mo
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Suspension torque settings
Would someone be able to tell me what the following areas on the front suspension need to be torqued to? I have an '06 F150 XLT 4WD.
*Upper strut mounting nut
*[3] Upper strut tower nuts
*Lower strut bolt and nut
*Upper ball joint
*Front sway bar end links
I am getting ready to install a leveling kit. Hopefully the kit that I have acquired works with my truck. I may have gotten duped on eBay.
*Upper strut mounting nut
*[3] Upper strut tower nuts
*Lower strut bolt and nut
*Upper ball joint
*Front sway bar end links
I am getting ready to install a leveling kit. Hopefully the kit that I have acquired works with my truck. I may have gotten duped on eBay.
#2
Senior Member
iTrader: (1)
this is according to my autosprings install kit....
3 factory nuts on strut 25lbs
3 spacer nylon nuts 35lbs
lower strut bolt 225lbs
upper ball joint 90lbs
lower sway bar end links 35lbs
says to re-torque after 300 miles...
Again this is what Autosprings install kit says.... so take it as that.... hope that helps....
3 factory nuts on strut 25lbs
3 spacer nylon nuts 35lbs
lower strut bolt 225lbs
upper ball joint 90lbs
lower sway bar end links 35lbs
says to re-torque after 300 miles...
Again this is what Autosprings install kit says.... so take it as that.... hope that helps....
The following users liked this post:
08Crew4x4 (09-18-2013)