Snorkel kits?
#23
SuthernF150
#24
Sgt Shawshank
Thread Starter
Originally Posted by Amarr014
was raining so hopefully i can take a few pics of the setup tomorrow... im really leaning towards a snorkel although i would have to modify a F-250 safari snorkel or build one from scratch...
Get an intake kit with a plastic tube and get one of spectres watertight filter housings and then run off the filter housing through the fender and up the a pillar ending with a snorkel scoop
Or if you know someone that bends 4in just custom make the intake completely and add your mass air sensor into it and use the watertight filter housing.
Have some one make and weld on a few small steel tabs shaped like the curves of the a pillar and
mount it using some self taping screws to hold it in place inside the door so the screw heads are hidden
On hole in the body either file the edge smooth and paint with touch up paint or file it smooth and add a piece of 1/8 in vacuum line to clean up the hole.
Any good exhaust shop can build you the outer part but I'm pretty positive the tb is 4in dia so youll either need a 4in to 3in silicone adapter or run 4in into the filter housing.
If you'd like part numbers for the housing I'm sure I could find them.
If you can't tell I've given much thought to this
#25
Sgt Shawshank
Thread Starter
filter housing
http://www.spectreperformance.com/in...et-outlet.html
intake tube
http://www.spectreperformance.com/in...tm-filter.html
and the scoop for the end
http://www.ebay.com/itm/Universal-Fi...sories&vxp=mtr
all you have to do is get a piece bent from the box to the scoop
http://www.spectreperformance.com/in...et-outlet.html
intake tube
http://www.spectreperformance.com/in...tm-filter.html
and the scoop for the end
http://www.ebay.com/itm/Universal-Fi...sories&vxp=mtr
all you have to do is get a piece bent from the box to the scoop
#26
SuthernF150
IM def going to look into this and show my shop your post... im also a student so it will take me a while to get this going but it looks like it should be the route im going... only other idea i have is to do some sort of Gotts mod with a closed box intake like volant
#27
Sgt Shawshank
Thread Starter
youll have to have an intake kit cause the factory air box isnt airtight until after the filter
#28
snorkel for f150
My wife drives my F150 to work. 64 miles roundtrip. I'm in Houston. Lots of flooding. I want her to NOT get stuck because she went thru deep water. Sooo, I want to put a snorkel on it.
#29
Senior Member