Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Shackle kit for '07 FX2...

Thread Tools
 
Search this Thread
 
Old 08-27-2015, 07:40 AM
  #1  
Junior Member
Thread Starter
 
BIGGEORGIADAWG's Avatar
 
Join Date: Aug 2015
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Shackle kit for '07 FX2...

Hey guys, first post here. Just bought an '07 FX2 and would like to lower the rear to level out the truck. It's a supercab with the 6.5' bed. Any suggestions on which kit is the best for the money. Would like to stay as cheap as possible while still getting good quality. Any input is appreciated. Thanks!
Old 08-27-2015, 11:23 AM
  #2  
Senior Member
 
Jaytizzle's Avatar
 
Join Date: Jan 2015
Location: Huntington Beach, CA
Posts: 237
Received 20 Likes on 19 Posts
Default

Originally Posted by BIGGEORGIADAWG
Hey guys, first post here. Just bought an '07 FX2 and would like to lower the rear to level out the truck. It's a supercab with the 6.5' bed. Any suggestions on which kit is the best for the money. Would like to stay as cheap as possible while still getting good quality. Any input is appreciated. Thanks!
I would just go with Belltech.


They have a 1" and 2" rear shackle kit.


I've purchased stuff from Stillen and they always have good prices.
Old 08-27-2015, 11:28 AM
  #3  
Junior Member
Thread Starter
 
BIGGEORGIADAWG's Avatar
 
Join Date: Aug 2015
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

I am about decided on the Belltech but I saw somewhere else that said the Groundforce kit was better because it had urethane bushings instead of rubber (are the Belltech bushings rubber or urethane) and came with the shims?
Old 08-27-2015, 11:50 AM
  #4  
Senior Member
 
Jaytizzle's Avatar
 
Join Date: Jan 2015
Location: Huntington Beach, CA
Posts: 237
Received 20 Likes on 19 Posts
Default

Originally Posted by BIGGEORGIADAWG
I am about decided on the Belltech but I saw somewhere else that said the Groundforce kit was better because it had urethane bushings instead of rubber (are the Belltech bushings rubber or urethane) and came with the shims?
I just checked Belltech's website and they are rubber bushings...


http://www.belltech.com/products/bel...kit-12853.html


JT



Quick Reply: Shackle kit for '07 FX2...



All times are GMT -4. The time now is 04:49 AM.