RyanD's F150 Build!!!
08-14-2013, 12:10 PM
#1
Senior Member
Thread Starter
RyanD's F150 Build!!!
Well I decided to start my build thread with my new wheels. I'm planning on putting a 6" BDS lift on 35's. As time goes on I'll continue to update this thread with anything I add to my F150. As for previous modifications on the truck, just ask and I will add them to this as well if they aren't already covered in late threads.
Here we go, I currently have a 06 F150 Lariat 5.4L V8. I just put on a set of RBP 94r(Black w/ chrome inserts) wheels. Here are before and after pics.
Before:
After:
I'm sorry about the pic quality when I uploaded it, the quality went way down.
Here we go, I currently have a 06 F150 Lariat 5.4L V8. I just put on a set of RBP 94r(Black w/ chrome inserts) wheels. Here are before and after pics.
Before:
After:
I'm sorry about the pic quality when I uploaded it, the quality went way down.
08-02-2014, 12:49 AM
#2
Senior Member
Thread Starter
Today I installed some LEDs in my center console. I removed the inside console.
Then I stuck about a foot of LEDs under the right side.
I ran the wires to a normally-closed momentary switch and installed it on the back lip of the console.
Then I tapped into the 12v+ from my front cig. lighter and ran wires under the console around to the back of the switch with plugs if I ever needed to disconnect the lights for maintenance.
And here is the final product! It's much brighter in person.
Then I stuck about a foot of LEDs under the right side.
I ran the wires to a normally-closed momentary switch and installed it on the back lip of the console.
Then I tapped into the 12v+ from my front cig. lighter and ran wires under the console around to the back of the switch with plugs if I ever needed to disconnect the lights for maintenance.
And here is the final product! It's much brighter in person.
08-02-2014, 01:13 AM
#3
Today I installed some LEDs in my center console. I removed the inside console. Then I stuck about a foot of LEDs under the right side. I ran the wires to a normally-closed momentary switch and installed it on the back lip of the console. Then I tapped into the 12v+ from my front cig. lighter and ran wires under the console around to the back of the switch with plugs if I ever needed to disconnect the lights for maintenance. And here is the final product! It's much brighter in person.
08-13-2014, 02:16 PM
#5
Senior Member
Thread Starter
I finally got around to uploading pics. Here it is a 6" BDS suspension lift on 35" Nitto Trail Grapplers. Im extremely happy with how it came out!
Last edited by Smokestone12; 08-13-2014 at 02:38 PM.
