Neggy

I have 4.10 gears and I have never found the power to be lacking. I have to pull out into traffic on wet pavement left turn and up hill regularly and it requires 4H to get hooked up.

So my next question is how are you guys who are running superchargers getting your trucks to hook up without carrying a few hundred pounds of sand bags in the bed?

kalealmighty

i have 37" tires on mine thats how

gage

Yes i was refurring to only the install as 1000 dolars and with the rousch kit there was no additional parts needed beside the coolant fro 10 bucks or so. As far as hooking up goes i run 33s so that is all i do, but they still spin for a while.

rhicks20

The limited slip on my FX4 helps with taking off. It might break traction for a half second or so, but after that, it just goes.

04 True Blue FX4 Screw
Options: Moon roof/ Reverse sensing/ Audiophile w/sub/ power rear window/
MODS: Roush charger/ True duals-dumped/ 20" DEJ Black Chrome tanks/305-55-20 Cooper Zeon/ Custom Gauge pod/Leather throughout/Leveling kit/

Blown Ford

I don't floor it from a stand still... Then again somtimes flooring it at 30 breaks em loose. Depends on how cold it is. Its really no different than driving a Vette or any other fast car. Just cause it can burn em down doesn't mean you can't drive it normally.

neilsen69

Need some help. Bought a Roush supercharger second hand a couple years back. Around $1,700.00. Came with most parts. Didn't put it into my 2006 5.4L 3V FX4 because I knew the motor in that truck was in bad shape from the day I bought. After 3 years of running diesel oil to clean it, she finally seized. I am purchasing a remanufactured 3-year 100,000-mile motor. Since the old is coming out and the new going in, I thought now would be a good time to install the Roush. While the new motor is out or at least all attachments are off it. Yes, probably will void the warranty.

I am missing pieces still and having trouble sourcing them. Need help with what I am missing or alternative parts that may work.

This supercharger was purchased to install onto a 2006 5.4L 3 V

That motor is being swapped out for a 2008 5.4L 3 V with the improvements regarding the spark plugs. Someone told me the pully system is different between the 06 5.4l and the 08 5.4l.

Is there anything different that I need to be made aware of or will this supercharge fit either one?

R18120002-00-AA

DOUBLE SIDED TAPE

$0.99 This I can get


W500213-S437

SCREW, M6 X 1.0 X 16

$2.77/EA

5 REQUIRED I think I can get these


R07070007-13-CA

DEGAS RESEVOIR Is there a substitute for this or can I use any degas bottle that can fit???

$76.99


R07070020-11-AA

BRACKET, F150 I/C S/C SECONDARY DEGAS BOTTLE

$13.38 Is there a substitute for this or can I use any degas bottle that can fit???


R07010018-13-AA

CRANKSHAFT DAMPER BOLT Can you provide any information about this bolt. Details, size or where I might get it?

$5.99

R07000024-11-AC fan spacer


R07110002-11-AA

FUEL INJECTOR (EA)

$55.99

AVAILABLE : Is there an alternative injector? Aftermarket? Is 38lb my only option? Without this item is the whole supercharger usless?



N605918-S427

BOLTS

NO LONGER AVAILABLE: Can you provide more details about these bolts so that I can source them elsewhere



1112-8B274KIT-AA

UPPER RADIATOR HOSE KIT

3-5 DAY LEAD TIME: Can this item be sourced elsewhere? Or can it be fabricated?



R07020023-11-AA

HARDWARE KIT D

NO LONGER AVAILABLE AS COMPLETE KIT – MISSING S/C BOOST BYPASS SOLENOID BRKT. ASSY.

WHAT IS AVAILABLE IS ALL OTHER INDIVIDUAL COMPONENTS FROM THAT KIT: Do you have any components for this kit?





What is this part? 403426

neilsen69

I have no idea why it posted so big