RIV Customz

I apologize for the untimely response. I haven't had much activity here lately. I have a local place here call FiberTech that sells heim joints. However, if you want some bad-azz rebuidable heims check out Ballistic Fabrications online. They have some great products. As far as the rear setup for my shock reservoirs I fabbed something pretty simple. I basically took some schedule 40 mild steel pipe and cut a strip out of it to run horizontally against the backside of the reservoir. This strip attaches to the frame with smaller pieces of pipe that are reinforced with gussets. Pipe clamps keep the reservoirs attached to the strip. I TIG welded everything with some 70S2 TIG wire. There are a few pics in my album.